Synthesis and Characterization of Graphene Oxide/Polyethylene Glycol/Folic Acid/Brucine Nanocomposites and Their Anticancer Activity on HepG2 Cells.

Background: Liver cancer is the sixth most prevalent form of cancer and the second major cause of cancer-associated mortalities worldwide. Cancer nanotechnology has the ability to fundamentally alter cancer treatment, diagnosis, and detection. Objective: In this study, we explained the development of graphene oxide/polyethylene glycol/folic acid/brucine nanocomposites (GO/PEG/Bru-FA NCs) and evaluated their antimicrobial and anticancer effect on the liver cancer HepG2 cells. Methodology: The GO/PEG/Bru-FA NCs were prepared using the co-precipitation technique and characterized using various techniques. The cytotoxicity of the GO/PEG/Bru-FA NCs was tested against both liver cancer HepG2 and non-malignant Vero cells using an MTT assay. The antimicrobial activity of the GO/PEG/Bru-FA NCs was tested against several pathogens using the well diffusion technique. The effects of GO/PEG/Bru-FA NCs on endogenous ROS accumulation, apoptosis, and MMP levels were examined using corresponding fluorescent staining assays, respectively. The apoptotic protein expressions, such as Bax, Bcl-2, and caspases, were studied using the corresponding kits. Results: The findings of various characterization assays revealed the development of GO/PEG/Bru-FA NCs with face-centered spherical morphology and an agglomerated appearance with an average size of 197.40 nm. The GO/PEG/Bru-FA NCs treatment remarkably inhibited the growth of the tested pathogens. The findings of the MTT assay evidenced that the GO/PEG/Bru-FA NCs effectively reduced the HepG2 cell growth while not showing toxicity to the Vero cells. The findings of the fluorescent assay proved that the GO/PEG/Bru-FA NCs increased ROS generation, reduced MMP levels, and promoted apoptosis in the HepG2 cells. The levels of Bax, caspase-9, and -3 were increased, and Bcl-2 was reduced in the GO/PEG/Bru-FA NCs-treated HepG2 cells. Conclusion: The results of this work demonstrate that GO/PEG/Bru-FA NCs suppress viability and induce apoptosis in HepG2 cells, indicating their potential as an anticancer candidate.

Therapeutic strategy of biological macromolecules based natural bioactive compounds of diabetes mellitus and future perspectives: A systematic review.

High blood glucose levels are a hallmark of the metabolic syndrome known as diabetes mellitus. More than 600 million people will have diabetes by 2045 as the global prevalence of the disease continues to rise. Contemporary antidiabetic drugs reduce hyperglycemia and its consequences. However, these drugs come with undesirable side effects, so it's encouraging that research into plant extracts and bioactive substances with antidiabetic characteristics is on the rise. Natural remedies are preferable to conventional anti-diabetic drugs since they are safer for the body, more affordable and have fewer potential adverse effects. Biological macromolecules such as liposomes, niosomes, polymeric nanoparticles, solid lipid nanoparticles, nanoemulsions and metallic nanoparticles are explored in this review. Current drug restrictions have been addressed, and the effectiveness of plant-based antidiabetic therapies has enhanced the merits of these methods. Plant extracts' loading capacity and the carriers' stability are the primary obstacles in developing plant-based nanocarriers. Hydrophilic, hydrophobic, and amphiphilic drugs are covered, and a brief overview of the amphipathic features of liposomes, phospholipids, and lipid nanocarriers is provided. Metallic nanoparticles' benefits and attendant risks are highlighted to emphasize their efficiency in treating hyperglycemia. Researchers interested in the potential of nanoparticles loaded with plant extracts as antidiabetic therapeutics may find the current helpful review.

Topical Delivery of Terbinafine HCL Using Nanogels: A New Approach to Superficial Fungal Infection Treatment.

This study investigated pH-responsive Terbinafine HCL (TBH)-loaded nanogels as a new approach to treating superficial fungal infections. Acrylic acid (AA) is a synthetic monomer that was crosslinked with a natural polymer (gelatin) using a free radical polymerization technique to fabricate gelatin-g-poly-(acrylic acid) nanogels. Ammonium persulphate (APS) and N, N'-methylene bisacrylamide (MBA) were used as the initiator and crosslinker, respectively. Developed gelatin-g-poly-(acrylic acid) nanogels were evaluated for the swelling study (pH 1.2, 5, 7.4), DEE, particle size, FTIR, thermal stability (TGA, DSC), XRD, SEM, DEE, and in vitro drug release study to obtain optimized nanogels. Optimized nanogels were incorporated into 1% HPMC gel and then evaluated in comparison with Lamisil cream 1% for TBH stratum corneum retention, skin irritation, and in vitro and in vivo antifungal activity studies. Optimized nanogels (AAG 7) demonstrated a 255 nm particle size, 82.37% DEE, pH-dependent swelling, 92.15% of drug release (pH) 7.4 within 12 h, and a larger zone of inhibition compared to Lamisil cream. HPMC-loaded nanogels significantly improved the TBH skin retention percentage, as revealed by an ex vivo skin retention study, indicating the usefulness of nanogels for topical use. In vivo studies conducted on animal models infected with a fungal infection have further confirmed the effectiveness of nanogels compared with the Lamisil cream. Hence, Gelatin-g-poly-(acrylic acid) nanogels carrying poorly soluble TBH can be a promising approach for treating superficial fungal infections.

The Fabrication of Halogen-Doped FeWO4 Heterostructure Anchored over Graphene Oxide Nanosheets for the Sunlight-Driven Photocatalytic Degradation of Methylene Blue Dye.

Rapid industrialization and urbanization are the two significant issues causing environmental pollution. The polluted water from various industries contains refractory organic materials such as dyes. Heterogeneous photocatalysis using semiconductor metal oxides is an effective remediation technique for wastewater treatment. In this research, we used a co-precipitation-assisted hydrothermal method to synthesize a novel I-FeWO4/GO sunlight-active nanocomposite. Introducing dopant reductive iodine species improved the catalytic activity of FeWO4/GO. I- ions improved the catalytic performance of H2O2 by doping into FeWO4/GO composite. Due to I- doping and the introduction of graphene as a support medium, enhanced charge separation and transfer were observed, which is crucial for efficient heterogeneous surface reactions. Various techniques, like FTIR, SEM-EDX, XRD, and UV-Vis spectroscopy, were used to characterize composites. The Tauc plot method was used to calculate pristine and iodine-doped FeWO4/GO bandgap. Iodine doping reduced the bandgap from 2.8 eV to 2.6 eV. The degradation of methylene blue (MB) was evaluated by optimizing various parameters like catalyst concentration, oxidant dose, pH, and time. The optimum conditions for photocatalysts where maximum degradation occurred were pH = 7 for both FeWO4/GO and I-FeWO4/GO; oxidant dose = 9 mM and 7 mM for FeWO4/GO and I-FeWO4/GO; and catalyst concentration = 30 mg and 35 mg/100 mL for FeWO4/GO and I-FeWO4/GO; the optimum time was 120 min. Under these optimum conditions, FeWO4/GO and I-FeWO4/GO showed 92.0% and 97.0% degradation of MB dye.

Chitosan biopolymer functionalized with graphene oxide and titanium dioxide with Escin metallic nanocomposites for anticancer potential against colon cancer.

Our study produced GO-TiO2-chitosan-escin nanocomposites (GTCEnc), characterized them using physical and biological methods, and evaluated their potential as cancer treatment candidates. Standard protocols were used to produce GTCEnc. Nanocomposites are created using XRD, FTIR, UV-Vis, and PL spectroscopy analysis. The morphology and ultrastructure of nanocomposites were investigated using SEM and TEM. Nanocomposites containing TiO2, GO, chitosan, and escin nanostructures were characterized using diffraction, microscopy, and spectroscopy; the antimicrobial activity of GTCEnc was investigated. Various methods were used to test the anticancer activity of GTCEnc against COLO 205 cell lines, including MTT, EtBr/AO, DAPI, JC-1, Annexin-V/FITC, cell cycle analysis, and activation of pro-apoptotic markers, such as caspase-3, -8, and -9. The nanocomposites were cytotoxic to COLO 205 cells, with an IC50 of 22.68 µg/mL, but not to 293T cells. In cells treated with nanomaterials, cytotoxicity, nuclear damage, apoptosis induction, and free radical production were significantly increased. Our finding suggests that GTCEnc has potent anticancer and antibacterial activity in vitro because of its unique nanocomposite properties and antibacterial and anticancer activity in vitro. Additional research is required to understand the clinical efficacy of these nanocomposites.

Computer-aided identification of dengue virus NS2B/NS3 protease inhibitors: an integrated molecular modelling approach for screening of phytochemicals.

Globally, dengue (DENV) fever has appeared as the most widespread vector-borne disease, affecting more than 100 million individuals annually. No approved anti-DENV therapy or preventive vaccine is available yet. DENV NS3 protein is associated with protease activity and is essential for viral replication process within the host cell. NS2B is linked with NS3 protein as a cofactor. Hence, NS3/NS2B is a potential druggable target for developing inhibitors against dengue virus. In the present study, a dataset of Beta vulgaris L.-based natural compounds was developed. Virtual ligand screening of 30 phytochemicals was carried out to find novel inhibitors against the NS2B/NS3 protein. Spatial affinity, drug-likeness, and binding behaviors of selected phytochemicals were analyzed. Post-simulation analysis, including Principal Component Analysis (PCA), MMGBSA, and Co-relation analysis, was also performed to provide deep insight for elucidating protein-ligand complexes. This computer-aided screening scrutinized four potent phytochemicals, including betavulgaroside II, vitexin xyloside, epicatechin, and isovitexin2-O-xyloside inhibitors exhibiting optimal binding with viral NS3/NS2B protein. Our study brings novel scaffolds against DENV NS2B/NS3 of serotype-2 to act as lead molecules for further biological optimization. In future, this study will prompt the exploration and development of adjuvant anti-DENV therapy based on natural compounds.Communicated by Ramaswamy H. Sarma.

An application of carbohydrate polymers-based surface-modified gold nanoparticles for improved target delivery to liver cancer therapy - A systemic review.

Gold nanoparticles have been broadly investigated as cancer diagnostic and therapeutic agents. Gold nanoparticles are a favorable drug delivery vehicle with their unique subcellular size and good biocompatibility. Chitosan, agarose, fucoidan, porphyran, carrageenan, ulvan and alginate are all examples of biologically active macromolecules. Since they are biocompatible, biodegradable, and irritant-free, they find extensive application in biomedical and macromolecules. The versatility of these compounds is enhanced because they are amenable to modification by functional groups like sulfation, acetylation, and carboxylation. In an eco-friendly preparation process, the biocompatibility and targeting of GNPs can be improved by functionalizing them with polysaccharides. This article provides an update on using carbohydrate-based GNPs in liver cancer treatment, imaging, and drug administration. Selective surface modification of several carbohydrate types and further biological uses of GNPs are focused on.

Carbohydrate polymers-based surface modified nano delivery systems for enhanced target delivery to colon cancer - A review.

Carbohydrate polymers-based surface-modified nano-delivery systems have gained significant attention in recent years for enhancing targeted delivery to colon cancer. These systems leverage carbohydrate polymers' unique properties, such as biocompatibility, biodegradability, and controlled release. These properties make them suitable candidates for drug delivery applications. Nano-delivery systems loaded with bioactive compounds are well-studied for targeted colorectal cancer delivery. However, those drugs' target reach is still limited in various nano-delivery systems. To overcome this limitation, surface modification of nanoparticles with carbohydrate polymers like chitosan, pectin, alginate, and guar gum showed enhanced target-reaching capacity along with enhanced anticancer efficacy. Recently, a chitosan-decorated PLGA nanoparticle was constructed with tannic acid and vitamin E and showed long-term release of specific targets along with higher anticancer efficacy. Similarly, Chitosan-conjugated glucuronic acid-coated silica nanoparticles loaded with capecitabine were studied against colon cancer and found to be the pH-responsive controlled release of capecitabine with higher anticancer efficacy. Surface-modified carbohydrate polymers have promising potential for improving colon cancer target delivery. By leveraging the unique properties of these polymers, such as surface modification, pH responsiveness, mucoadhesion, controlled drug release, and combination therapy, researchers are working toward developing more effective and targeted treatment strategies for colon cancer.

COVID-19 and severity of liver diseases: Possible crosstalk and clinical implications.

COVID-19-infected individuals and those who recovered from the infection have been demonstrated to have elevated liver enzymes or abnormal liver biochemistries, particularly with preexisting liver diseases, liver metabolic disorders, viral hepatitis, and other hepatic comorbidities. However, possible crosstalk and intricate interplay between COVID-19 and liver disease severity are still elusive, and the available data are murky and confined. Similarly, the syndemic of other blood-borne infectious diseases, chemical-induced liver injuries, and chronic hepatic diseases continued to take lives while showing signs of worsening due to the COVID-19 crisis. Moreover, the pandemic is not over yet and is transitioning to becoming an epidemic in recent years; hence, monitoring liver function tests (LFTs) and assessing hepatic consequences of COVID-19 in patients with or without liver illnesses would be of paramount interest. This pragmatic review explores the correlations between COVID-19 and liver disease severity based on abnormal liver biochemistries and other possible mechanisms in individuals of all ages from the emergence of the COVID-19 pandemic to the post-pandemic period. The review also alludes to clinical perspectives of such interactions to curb overlapping hepatic diseases in people who recovered from the infection or living with long COVID-19.

Investigation of boron-doped graphene oxide anchored with copper sulphide flowers as visible light active photocatalyst for methylene blue degradation.

The non-biodegradable nature of waste emitted from the agriculture and industrial sector contaminates freshwater reserves. Fabrication of highly effective and low-cost heterogeneous photocatalysts is crucial for sustainable wastewater treatment. The present research study aims to construct a novel photocatalyst using a facile ultrasonication-assisted hydrothermal method. Metal sulphides and doped carbon support materials work well to fabricate hybrid sunlight active systems that efficiently harness green energy and are eco-friendly. Boron-doped graphene oxide-supported copper sulphide nanocomposite was synthesized hydrothermally and was assessed for sunlight-assisted photocatalytic degradation of methylene blue dye. BGO/CuS was characterized through various techniques such as SEM-EDS, XRD, XPS, FTIR, BET, PL, and UV-Vis DRS spectroscopy. The bandgap of BGO-CuS was found to be 2.51 eV as evaluated through the tauc plot method. The enhanced dye degradation was obtained at optimum conditions of pH = 8, catalyst concentration (20 mg/100 mL for BGO-CuS), oxidant dose (10 mM for BGO-CuS), and optimum time of irradiation was 60 min. The novel boron-doped nanocomposite effectively degraded methylene blue up to 95% under sunlight. Holes and hydroxyl radicals were the key reactive species. Response surface methodology was used to analyze the interaction among several interacting parameters to remove dye methylene blue effectively.

SARS-CoV-2 Detection and COVID-19 Diagnosis: A Bird's Eye View.

The battle against severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) associated coronavirus disease 2019 (COVID-19) is continued worldwide by administering firsttime emergency authorized novel mRNA-based and conventional vector-antigen-based anti- COVID-19 vaccines to prevent further transmission of the virus as well as to reduce the severe respiratory complications of the infection in infected individuals. However; the emergence of numerous SARS-CoV-2 variants is of concern, and the identification of certain breakthrough and reinfection cases in vaccinated individuals as well as new cases soaring in some low-to-middle income countries (LMICs) and even in some resource-replete nations have raised concerns that only vaccine jabs would not be sufficient to control and vanquishing the pandemic. Lack of screening for asymptomatic COVID-19-infected subjects and inefficient management of diagnosed COVID-19 infections also pose some concerns and the need to fill the gaps among policies and strategies to reduce the pandemic in hospitals, healthcare services, and the general community. For this purpose, the development and deployment of rapid screening and diagnostic procedures are prerequisites in premises with high infection rates as well as to screen mass unaffected COVID-19 populations. Novel methods of variant identification and genome surveillance studies would be an asset to minimize virus transmission and infection severity. The proposition of this pragmatic review explores current paradigms for the screening of SARS-CoV-2 variants, identification, and diagnosis of COVID-19 infection, and insights into the late-stage development of new methods to better understand virus super spread variants and genome surveillance studies to predict pandemic trajectories.

Impact of alternate Mn doping in ternary nanocomposites on their structural, optical and antimicrobial properties: Comparative analysis of photocatalytic degradation and antibacterial activity.

The present study was done to investigate and compare the photocatalytic and antibacterial activity of two in situ Manganese doped ternary nanocomposites. The dual ternary hybrid systems comprised Mn-doped Ag2WO4 coupled with MoS2-GO and Mn-doped MoS2 coupled with Ag2WO4-GO. Both hierarchical alternate Mn-doped ternary heterojunctions formed efficient plasmonic catalysts for wastewater treatment. The novel nanocomposites were well-characterized using XRD, FTIR, SEM-EDS, HR-TEM, XPS, UV-VIS DRS, and PL techniques confirming the successful insertion of Mn+2 ions in respective host substrates. The bandgap of the ternary nanocomposites evaluated by the tauc plot showed them visible light-active nanocomposites. The photocatalytic ability of both Mn-doped coupled nanocomposites was investigated against the dye methylene blue. Both ternary nanocomposites showed excellent sunlight harvesting ability for dye degradation in 60 min. The maximum catalytic efficiency of both photocatalysts was obtained at a solution pH value of 8, photocatalyst dose and oxidant dose of 30 mg/100 mL and 1 mM for Mn-Ag2WO4/MoS2-GO, 50 mg/100 mL, 3 mM for Mn-MoS2/Ag2WO4-GO keeping IDC of 10 ppm for all photocatalysts. The nanocomposites showed excellent photocatalytic stability after five successive cycles. The response surface methodology was used as a statistical tool for the evaluation of the photocatalytic response of several interacting parameters for dye degradation by ternary composites. The antibacterial activity was determined by the inactivation of gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria by support-based doped ternary hybrids.

In Silico Identification of Cassava Genome-Encoded MicroRNAs with Predicted Potential for Targeting the ICMV-Kerala Begomoviral Pathogen of Cassava.

Cassava mosaic disease (CMD) is caused by several divergent species belonging to the genus Begomovirus (Geminiviridae) transmitted by the whitefly Bemisia tabaci cryptic species group. In India and other parts of Asia, the Indian cassava mosaic virus-Kerala (ICMV-Ker) is an emergent begomovirus of cassava causing damage that results in reduced yield loss and tuber quality. Double-stranded RNA-mediated interference (RNAi) is an evolutionary conserved mechanism in eukaryotes and highly effective, innate defense system to inhibit plant viral replication and/or translation. The objective of this study was to identify and characterize cassava genome-encoded microRNAs (mes-miRNA) that are predicted to target ICMV-Ker ssDNA-encoded mRNAs, based on four in silico algorithms: miRanda, RNA22, Tapirhybrid, and psRNA. The goal is to deploy the predicted miRNAs to trigger RNAi and develop cassava plants with resistance to ICMV-Ker. Experimentally validated mature cassava miRNA sequences (n = 175) were downloaded from the miRBase biological database and aligned with the ICMV-Ker genome. The miRNAs were evaluated for base-pairing with the cassava miRNA seed regions and to complementary binding sites within target viral mRNAs. Among the 175 locus-derived mes-miRNAs evaluated, one cassava miRNA homolog, mes-miR1446a, was identified to have a predicted miRNA target binding site, at position 2053 of the ICMV-Ker genome. To predict whether the cassava miRNA might bind predicted ICMV-Ker mRNA target(s) that could disrupt viral infection of cassava plants, a cassava locus-derived miRNA-mRNA regulatory network was constructed using Circos software. The in silico-predicted cassava locus-derived mes-miRNA-mRNA network corroborated interactions between cassava mature miRNAs and the ICMV-Ker genome that warrant in vivo analysis, which could lead to the development of ICMV-Ker resistant cassava plants.

Use of Real-Life Safety Data From International Pharmacovigilance Databases to Assess the Importance of Symptoms Associated With Gadolinium Exposure.

OBJECTIVE: Recent scientific publications have reported cases of patients who complained from a variety of symptoms after they received a gadolinium-based contrast agent (GBCA). The aim of this study was to appreciate the importance of these clinical manifestations in the overall population by assessing the weight of "symptoms associated with gadolinium exposure" (SAGE) among the bulk of safety experiences reported to major health authorities. MATERIALS AND METHODS: Symptoms associated with gadolinium exposure were identified from a review of the scientific literature, and the corresponding preferred terms were searched in each system organ class (SOC) category recorded in the European and North American pharmacovigilance databases EudraVigilance (EV) and FDA Adverse Event Reporting System (FAERS), respectively. The numbers of SAGE per preferred term, and cumulatively per SOC, were recorded and their weights in the overall spectrum of adverse events (AEs) were determined for each GBCA. RESULTS: The analysis of the selected AEs revealed a significantly higher SAGE weight for gadobenate dimeglumine (EV: 25.83%, FAERS: 32.24%) than for gadoteridol (EV: 15.51%; FAERS: 21.13%) and significantly lower SAGE weights for gadobutrol (EV: 7.75%; FAERS: 13.31%) and gadoterate meglumine (EV: 8.66%; FAERS: 12.99%). A similar ranking was found for most of the SOCs except for "nervous system disorders," probably owing to a limitation in the methods of data selection. Furthermore, this analysis showed a greater percentage of reports mentioning a decrease in the quality of life of the patients when they were exposed to gadobenate dimeglumine or gadoteridol than to gadobutrol or gadoterate meglumine. CONCLUSION: This study showed that SAGE represent a significant percentage of the bulk of AEs reported to the health authorities for each GBCA. It provided real-life arguments suggesting that SAGE may be more prevalent with linear than macrocyclic GBCAs and that gadoteridol may present a higher SAGE risk than the other macrocyclic contrast agents.

The Insight of In Silico and In Vitro evaluation of Beta vulgaris phytochemicals against Alzheimer's disease targeting acetylcholinesterase.

B. vulgaris extracts possess antioxidant, anti-inflammatory along with its role in improving memory disorders. Subsequently, in vitro and in silico studies of its purified phytochemicals may expand complementary and alternative Alzheimer's therapeutic option. Super activation of acetylcholinesterase enzyme is associated explicitly with Alzheimer's disease (AD) ultimately resulting in senile dementia. Hence, acetylcholinesterase enzyme inhibition is employed as a promising approach for AD treatment. Many FDA approved drugs are unable to cure the disease progression completely. The Present study was devised to explore the potential bioactive phytochemicals of B. vulgaris as alternative therapeutic agents against AD by conducting in vitro and in silico studies. To achieve this, chemical structures of phytochemicals were recruited from PubChem. Further, these compounds were analyzed for their binding affinities towards acetylcholinesterase (AChE) enzyme. Pharmacophoric ligand-based models showed major characteristics like, HBA, HBD, hydrophobicity, aromaticity and positively ionizable surface morphology for receptor binding. Virtual screening identified three hit compounds including betanin, myricetin and folic acid with least binding score compared to the reference drug, donepezil (-17 kcal/mol). Further, in vitro studies for anti-acetylcholinesterase activity of betanin and glycine betaine were performed. Dose response analysis showed 1.271 µM and 1.203 µM 50% inhibitory concentration (IC50) values for betanin and glycine betaine compounds respectively. Our findings indicate that phytoconstituents of B. vulgaris can be implicated as an alternative therapeutic drug candidate for cognitive disorders like Alzheimer's disease.

Understanding the role of atmospheric circulations and dispersion of air pollution associated with extreme smog events over South Asian megacity.

The winter fog/haze events in northeastern Pakistan and surrounding regions of India are often mixed with pollutants to form smog, and consequently damage human health and hampers daily life in the form of fatalities through road accidents, road blockages, and flight delays. The persistent anti-cyclonic conditions can further trigger the temperature inversion and prolong the smog event from days to weeks. The present study provides characteristics and lasting mechanisms of two persistent winter fog events (2016-2017) in Lahore, Pakistan, by using the fifth generation of European Center for Medium-Range Weather Forecast (ECMWF) ERA5 reanalysis data and National Oceanic and Atmospheric Administration (NOAA) Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model simulated with Global Data Assimilation System (GDAS) meteorological data. The results showed the presence of strong low-level anti-cyclonic circulations with wind speed less than 1.5 m/s from November to January over Eastern Punjab for two foggy winter seasons. The deep inversion during the fog events was observed that prevented the natural ventilation of air in the upper atmosphere and ultimately the smoke and heavy pollutant accumulated in the lower atmosphere. Furthermore, high relative humidity greater than 83% near the ground indicates a high condensation rate for water vapors to form fog near the ground. The analysis of the NOAA HYSPLIT trajectory model at different vertical heights revealed that smoke from stubble crop burning in the first week of November 2017 in Punjab and Haryana mixed with fog under favorable stable conditions that lead to intense smog over Lahore. This study will help to understand and to develop a forecasting mechanism of fog events by characterizing the meteorological conditions of the study area and to minimize the adverse impacts of smog on public health.

Photocatalytic degradation of methylene blue using polyaniline-based silver-doped zinc sulfide (PANI-Ag/ZnS) composites.

This study set out to determine the photocatalytic degradation potential of polyaniline-based silver-doped zinc sulfide composite (PANI-Ag/ZnS) for effective degradation of methylene blue. The heterogeneous photocatalytic experiments were carried out by irradiating aqueous dye solutions with ultraviolet light (UV-254 nm). The catalysts (ZnS, Ag/ZnS, PANI-ZnS, and PANI-Ag/ZnS) were prepared successfully and characterized by Fourier Transforms Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and Energy-dispersive X-ray diffraction (EDX). Combined with density functional theory calculations, a set of calculations has been performed for optimization, computation, and accuracy of the structure. After the optimization, the equilibrium lattice were a=b= (0.54447 nm), in good agreement with experimental results (a=b=c=0.54093 nm). Fermi energy levels Ef, indicating Ag-doped in ZnS as the impurity acceptor and for better visible-light photo-catalysis, narrow bandgap, and acceptor states are beneficial. The optimization of effective parameters like pH, catalyst dose, oxidant dose, dye concentration, and reaction time was carried out. The best degradation efficiency (> 95%) of PANI-Ag/ZnS composite against methylene was achieved within 60 min of reaction time under optimized conditions. The optimized conditions were recoded as follows: pH = 7, catalysts dose = 30 mg/L, oxidant dose = 3 mM, and irradiation time = 60 min under UV-254 nm for all catalysts. The central composite design (CCD) under the Response Surface Methodology (RSM) was chosen as a statistical tool to obtain the correlation of influential parameters. Five successive reusability trials were carried out to check the stability of catalysts.

Coal fly ash supported CoFe2O4 nanocomposites: Synergetic Fenton-like and photocatalytic degradation of methylene blue.

Rapid industrialization is causing a serious threat for the environment. Therefore, this research was aimed in developing ceramic cobalt ferrite (CoFe2O4) nanocomposite photocatalyst coated with coal fly ash (CFA-CoFe2O4) using facile hydrothermal synthesis route and their applications against methylene blue. The pristine cobalt ferrite photocatalyst was also prepared, characterized, and applied for efficiency comparison. Prepared photocatalyst were characterized by X-ray diffraction (XRD), fourier transformed infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS). Optical response of catalysts was check using photoluminescence spectroscopy (PL). pH drift method was used for the surface charge characteristics of the material under acidic and basic conditions of solution pH. The photocatalytic degradation potential of all the materials were determined under ultra-violet irradiations. The influencing reaction parameters like pH, catalyst dose, oxidant dose, dye concentration, and irradiation time, were sequentially optimized to obtain best suited conditions. The 99% degradation of 10 ppm methylene blue was achieved within 60 min of reaction time under pH = 5 and 7, catalyst dose = 10 and 12 mg/100 mL, oxidant = 12 mM and 5 mM for cobalt ferrite and CFA-CoFe2O4 photocatalysts, respectively. Afterwards, the radical scavenging experiments were conducted to find out the effective radical scavengers (˙OH, h+, and e-) in photocatalytic degradation process. The kinetic study of the process was done by applying 1st order, 2nd order, and BMG models. Statistical assessment of interaction effect among experimental variables was achieved using response surface methodology (RSM).

Phytochemical Screening and Protective Effects of Prunus persica Seeds Extract on Carbon Tetrachloride-Induced Hepatic Injury in Rats.

BACKGROUND AND PURPOSE: Carbon tetrachloride (CCl4) is a dynamic environmental toxin released from chemical factories and its concentration in the atmosphere is accelerating at an alarming proportion. The potential presence of CCl4 in the human body causes liver injury via free radical stimulated inflammatory responses. OBJECTIVES: In this study, protective effects of hydromethanolic seeds extract of Prunus persica (PPHM) were evaluated for free radical scavenging potential in CCl4 mediated acute liver toxicity in the murine model. EXPERIMENTAL APPROACH: Followed by acute oral toxicity analysis, liver cells of Sprague-Dawley (SD) rats were treated with CCl4 and subsequently, the chemoprophylactic effect of extract (400 mg/Kg dose) was evaluated using in vivo studies including, silymarin as the positive control. Biochemical parameters, staining (hematoxylin and eosin (H & E) and Masson's Trichome) and quantitative gene expression analysis via real-time PCR were used to evaluate hepatic damage control. RESULTS: The results illustrated that PPHM extract exhibit strong anti-oxidant activity, comparable to the positive control, gallic acid. Research study results also demonstrated that the extract treatment at 400 mg/Kg concentration is highly effective in protecting liver damage due to CCl4 exposure. Mechanistic investigations indicated that the therapeutic action of PPHM was correlated with the increase in Nrf2, NQO-1 and decrease in collagen III mRNA genes expression compared to CCl4 treated group. CONCLUSIONS AND IMPLICATIONS: Accordingly, our research study indicated that PPHM alleviated CCl4-mediated oxidative stress through Nrf2/NQO-1 pathway, thereby protecting liver damage against environmental toxins. Our findings provide supportive evidence to suggest PPHM as a novel nontoxic hepatoprotective agent.

Mixed metal ferrite (Mn0.6Zn0.4Fe2O4) intercalated g-C3N4nanocomposite: efficient sunlight driven photocatalyst for methylene blue degradation.

Visible active mixed metal ferrite intercalated semiconductor photocatalyst Mn0.6Zn0.4Fe2O4/g-C3N4was prepared via facile hydrothermal and liquid assembly method for methylene blue (MB) dye degradation. The prepared samples were well characterized in term of their functional groups, crystallinity, elemental analysis, surface morphology using Fourier transform infrared spectroscopy, x-ray diffraction spectroscopy, energy dispersive x-ray, and scanning electron microscopy, respectively. The optical response of catalysts was checked by estimating the energy band gap (Eg) of semiconductor photocatalysts using UV-vis spectroscopy. The photoluminescence spectroscopy was also performed to estimate the reduction in emission intensity after insertion of g-C3N4into Mn0.6Zn0.4Fe2O4.The novel composition of Mn0.6Zn0.4Fe2O4with g-C3N4,improved the optical response of pristine photocatalysts due to the reduction in the energy band gap and insertion of heterojunction. The surface area analysis of Mn0.6Zn0.4Fe2O4and Mn0.6Zn0.4Fe2O4/g-C3N4were acquired by Brunauer-Emmett-Teller. Point zero charge was also determined to observe the surface behavior of composite under different solution pH. Various parameters such as pH, catalyst dose, oxidant dose, irradiation time and initial dye concentration were optimized, and their effects were studied in photo-Fenton process. It was observed that 98% MB dye was degraded under optimized conditions (pH = 8, composite dose = 50 mg/100 ml, oxidant dose = 7 mM, initial dye conc. = 10 ppm, and irradiation time = 120 min). The results showed that when the ferrites of mixed metals (Mn, Zn) were used with g-C3N4their photocatalytic activity enhanced due to mutual effect of both mixed metals ferrite and g-C3N4, which is considerably higher than their individual effect already reported. Furthermore, the combined effect of independent variables was evaluated by response surface methodology.